|
|
|
ePowerSwitch 8XS Satellite - EPS 8XS |
Power over IP, Power Management über IP, Steckosenleiste, Steckdosenleisten, Ethernet, WAN, LAN, Strom, AUS/EIN, Server Remote Access, Remote Steuerung der Stromversorgung |
| |
|
|
|
• Preisliste zusenden
• Anfrage
|
| |
ePowerSwitch-8XS Satellite is a power distibution and control unit that enables remote power management of 8 devices through an RS-232 or RS-485 serial connection. The number of controlled power outlets con be extended up to 128 by cascading up to 16 Satellite Models.
This ePowerSwitch is ideal to conrol power outlets through the serial connection of a PC, a KVM Switch or a console server. It can also be connected to an ePowerSwitch 8XM Master to extend the number of controlled power outlets over IP
Benefits:
+ Power control of 8 to 128 outlets through RS-232 or RS-485
+ Easy to use serial protocol, ideal for Power Management over KVM Switches and Console Servers
+ Cascade with ePowerSwitch 8XM
+ Dual power Input idal for power management of servers with redundant power supply
+ Power-up sequencing avoids in-rushes currents at start-up.
+ Occupies only 1U of rack space.
Features:
On, Off, Toggle and Restart funtions
Each power outlet can be turned On/Off, toggled or restarted through a single RS-232 or RS-485 serial connection of a PC, a KVM Switch or a console Server
Cascadeable devices
16 Satellite models allow to control 128 power outlets through an RS-232 or RS-485 serial connection. 1 Master and 16 Satellite models allow to control 136 power outlets over one IP adress
Two separate AC Power Inputs
To improve the security and increase the total current load, the ePowerSwitch 8XS Satellite has two seperate power inputs. The first one provides power for outlets 1 to 4 and the second one for outlets 5 to 8. This feature is ideal for power management of servers with redundant power supplies.
Sequential power up/down
Avoids the risk for a power inrush to blow a fuse or circuit breaker in the data centre.
Integrated RS-232 / RS-485 Converter
This ePowerSwitch can be controlled either using a serial RS-232 Port or an RS-485 Netzwork
Non volatile memory
All configuration settings are saved in a non-volatile memory |
| |
 |
| |
 |
| |
|
| |
|
|
