IP Relay
RS232 und I/O Relay über IP
The typical application of the IP relay is using the serial console for remote control and reset of ethernet-enabled devices using relay switch.
You can easily connect an IP camera and interrupt its power in case of any problems.
You can also easily connect an additional relay for controlling a 230V device.
The relays need to be controlled using commands sent over Ethernet. If you also need the box to check functionality of the connected devices, we recommend the IP WatchDog, which can watch over 2 servers using serial port, PING command, or WWW page availability testing.
Basic features
* Ethernet Network - RJ45 (10BASE-T - IEEE 802.3)
* RS-232 serial port (RxD, TxD, CTS, RTS), Virtual Serial Port driver for Windows 2000/XP is free
* Two independent, Ethernet controlled relay, Channel 1 and Channel 2 can be configured as:
o NO (Normally Open) - a closing contact, which is opened after power-up
o NC (Normally Closed) - a break contact, which is closed after power-up
o PO (Power On) - power voltage led out over break contact (the voltage is present after power-up)
o PF (Power Off) - power voltage led out over closing contact (the voltage is not present after power-up or reset)
* remote control, relay switch, normally open, normally closed, ethernet i/o relay, remote outputA simple windows software, the IPRC, can be used for outputs controlling with a single mouse click.
* Typical configuration
o Relay 1: Controls break contact on the power-source output. This can be used as a power source for an IP camera, power relay or for example microwave modem power source.
o Relay 2: Controls closing contact, this is used for connecting the RESET switch.
* Secure access with a predefined IP address range and a 128-bit TEA encryption
* contact relay, relay switch, terminal server, ethernet i/o relay, IP Relay, web based relayIf you also need a RS-232 terminal server, you can control the relays using our HW VSP (Virtual Serial Port) software for Windows 2000/XP.
* Simple and well-documented M2M (Machine to Machine) communication protocol, many examples of communication for various programming languages - MS Visual Basic, Delphi, Borland C++, JAVA, PHP a and others..
* Simple and quick installation
Typical applications
IP Relay is a device designated to be used mainly in industry and telecommunication. The relay's contacts can be also modified for your needs, in the standart version one contact is used for interrupting power source, the other is used for parallel connecting to a RESET switch, both relays are controlled over Ethernet.
remote control, relay switch, terminal server, ip camera, ethernet i/o relay, remote monitoring, remote outputThis is a typical IP Relay configuration, where Channel 1 (Ch1) controls IP camera power and Channel 2 (Ch2) is used for remote server reset.
The power source is meant for connecting the controlled device's power supply. When the IP-realy is powered up, this "Supply" output is automatically enabled, so the power supply for the connected device doesn't depend on the Ethernet connection.
Usage examples
* Remote monitoring of IP camera system's failure
* Remote control of the network configuration
* Remote control and restarting of micowawe connections.
* Remote devices control (ventilation, door opening..)
One built-in serial port can be used for remote access using RS-232 console, but it also can be used as a virtual serial port (for example "COM 8") using the HW Virtual Serial Port driver.
You can order the IP Relay in the DIN molding version, or a modification with 8 inputs and 8 outputs (the I/O Controller). If you are not sure wheather the IP Relay can be used in your application
