|
|
| |
| iBB-C10-M - 8 Port iBootBar für 10/100 Ethernet, WEB, Telnet, SNMP, SSL, Serial Port und internes Modem |
| |
|
|
• Preisliste zusenden
• Anfrage |
| |
Get all the power of the iBoot and more with these multioutlet power strips. Control each outlet independently from
Web, Telnet, SNMP. Have network access plus out-ofband control via serial port and internal modem with both
data and DTMF tone dial control. Wherever you are, you
are in complete control.
iBootBar is available with single or dual power inlets. Dual
power is ideal for remote reboot control servers, routers, etc.
with redundant power supplies. Simultaneously switch both
supplies off and on for reboot, security or energy
management. These models are also ideal for switching
higher current devices. Each inlet is distributed to 4 outlets,
which can be switched in pairs for redundant systems, or
individually for higher current devices.
Models are available for North American 15 and 20 amp
circuits, as well as international 115/230 VAC, 15/10 amp.
The internal modem option allows connection to the
iBootBar from anywhere, anytime. Dial-in with a laptop or
terminal for complete control of all functions, or access
iBootBar with any telephone for quick power on, off or
reboot functions. Telephone users are guided with voice
prompts and status information.
iBootBar continuously monitors the current draw from its
outlets and reports user settable high and low current alarms.
Know immediately when there is too much load, or a device
stops working. Alarms are delivered both by email and
SNMP traps.
Features Benefits
Multiple Control Options
• Web
• Telnet
• SNMP
• Serial
•
Internal Modem – Menu and
DTMF dial tones
Multi-User
Assign permissions to each user
for outlets and configuration
Current Sensing
and Alarms
Know when critical power
conditions occur and take
immediate action.
Dual and Single Power
Inlet
Supports dual redundant
powered devices with a single
click.
Automatic Operation
Auto-Ping independently for
each outlet.
Group and Stagger
Combine any outlets into logical
groups and power up devices in
sequence to reduce power
surges.
Link Multiple units
together
One IP address and interface
for up to 256 outlets. |
| |
|
| |
|
| |
 |
|
|
