|
|
|
Sentry Commander PT45 von Servertech |
Kombination Remote Power Management und Pass-Thru Console Port Access (RS232 over IP) |
| |
|
|
|
|
• Preisliste zusenden
• Anfrage
|
| |
Sentry Commander PT45
The Sentry Commander PT45 uniquely combines Remote Power Management and Pass-Thru Console Port Access™ into one enclosure and - distinctively - one interface. The PT45 operates distributed Inline Power Modules (IPM’s), which provide four distinct advantages:
Independent Power: One-to-one ratio between power input, IPM and device
eliminates single point-of-failure.
Greater Distance: Each IPM can be up to 1000’ from the PT45 Commander.
Mixed Amperage: 10-Amp & 20-Amp IPMs to control both servers & network gear.
Mixed Voltage: 110V, 230V & -48 VDC IPMs can be controlled from one PT45.
The Pass-Thru Port Access integrates secure, in-band and/or out-of-band serial connections to the console ports of up to 4 inter-networking devices for remote problem determination. The serial console is the only universal out-of-band management media for all the equipment in the data center.
Remote Power Management of the PT45’s distributed IPM’s allows a network manager to power off, power on and reboot network devices from any location via secure telnet, a secure web session or secure out-of-band session. Now the network operations center can eliminate dispatching a field service person for manual intervention. Using Sentry Commander they can quickly restart locked-up remote severs & internetworking devices to ensure that the network is fully operational
around the clock.
Field-Replaceable Global Secure Modem
The PT45 features an optional field-replaceable global secure modem that supports 56Kbps operation, Call-Back Security, and remote configuration. It is approved for use in 48 countries. Additionally, the internal modem option and Pass-Thru Port Access can eliminate multiple modems and dial-up lines and the need for an expensive terminal server.
Solution for CPE and Data Center Environments
Especially useful for accessing Customer Premise Equipment (CPE), the PT45 is ideal for servers and routers in remote wiring closets, providing access to both reboot a remote device and connect to its console port to monitor its boot-up process and ensure it returns to an operational state.
KEY FEATURES
Remote Power Management: Reboot locked-up servers and network gear, or power-off unused receptacles.
Pass-Thru Console Port Access:Console port access to remote servers and routers provides universal management for all data center serial devices.
IP Control:10/100 Base-T Ethernet via HTML, Telnet and SNMP.
Web GUI: Full configuration and control for grouping and control of outlets, assigning user accounts and configuring network settings.
Secure Out-of-Band: Optional integrated secure modem provides out-of-band connection and management.
RS-232 Control: Manage the PT45 via an existing computer, KVM switch, terminal server or other serial device.
Environmental Monitoring: Temperature, Relative Humidity, Water and Cabinet door contact closures (with optional add-on).
Authentication: 16-char. Username/ Password for network admin and multiple users, with access rights only to designated outlets and ports.
Advanced Security: Secure Proxy Server for complete encryption of network sessions. MD5 security for browsers.
Multiple Concurrent Users: Allow multiple users concurrent access to each PT45 so each user can control their designated power outlets and ports.
Programmable Outlet Receptacle Names: Uniquely identify each server or other device by IP address or serial number. Up to 24-char.
Rack space savings: 1U form-factor
110 and 220 V AC models |
| |
In-Line Power Module 230 VAC, 6 Amp
The In-Line Power Module comes in two models that support 110 VAC and 230 VAC power feeds. This in-line model has the IEC 320 power input and output connectors on each end. The 230 VAC model allows country specific power input cords. Cable retainer brackets mechanically secure the cables to the Power Module. |
|
|
| |
|
|
In-Line Power Module 110 VAC, 16 Amp In-Line Power Module 230 VAC, 12 Amp
This high-capacity Power Module supports big servers and large routers such as the Cicso 7500 series. The two models of this Power Module support the IEC C19 input connector and the IEC C20 output connector. Cable retainer brackets mechanically secure the cables to the Power Module. |
|
|
| |
|
|
In-Line –48 VDC, 20 Amp
This new –48 VDC power module can be used in locations where a mix of VAC and –48 VDC equipment is installed. The –48 VDC Power Module can be controlled from any of the Sentry Rack Mount Remote Power Controllers. Input and Output terminal blocks are located on each end of the Power Module. |
|
|
| |
|
|
Mounting Bracket In-Line 10 Amp
This new mounting bracket permits two In-LIne Power Modules to be securely attached on the back rails in your equipment cabinet. Many ISPs use this method to locate all the power control equipment inside their customers’ locked equipment racks. The Power Modules can be located up to 1000 feet away via the RJ style signal cables. |
|
|
| |
|
|
Mounting Bracket In-line 20 Amp
This heavy duty mounting bracket supports two of the highcapacity 16 Amp Power Modules. The large 20 Amp power cables are mechanically secured to the Power Modules using the built-in cable retainer clips. This bracket and Power Module assembly are widely used to support Cisco 7500 series dual power supply equipment. |
|
|
| |
|
|
|
| |
|
|
